Welches Getriebeöl???

Schwierig,wenn du wüsstest was du für nen Getriebe drin hast.
wenn es auch original ist,dann ist es ein Tremec T150 3-Speed und ein Dana20 oder ein Dana300 VTG.

Wenn es ein T150 ist. Kannst du das Übersetzen.

When filling your T150 with gear oil, we recommend that you select a conventional mineral oil or a para-synthetic in lieu of a full synthetic oil. Properly assembled manual gearboxes do not have the thermal strains seen by combustion engines or hypoid gears. Synthetic fluid in these gearboxes, while not harmful, is probably an economic waste.

Hypoid gear oil is sulphurized higher than transmission oil and can be mildly corrosive to the non-ferrous alloys used for synchros, bushings and thrust washers in these transmissions.

An 80W-90, API-GL5 or MT-1 rated fluid is very good. Some claim faster shifts from using a 50W engine oil in their transmission and we do not consider this to be contraindicated.

Beim Danna300 (dana20 dürfte identisch sein):
When filling your 300 with gear oil, we recommend that you select a conventional mineral oil or a para-synthetic in lieu of a full synthetic oil. Properly assembled manual gearboxes do not have the thermal strains seen by combustion engines or hypoid gears. Synthetic fluid in these gearboxes, while not harmful, is probably an economic waste.

Hypoid gear oil is sulphurized higher than transmission oil and can be mildly corrosive to the non-ferrous alloys used for thrust washers in these transmissions.

An 80W-90, API-GL5 or MT-1 rated fluid is very good.



In die Diffs: würde ich nur 75 W 140 Syntetik Achsenöl reinmachen. Wenn dir das nnicht soviel wert ist normales Hinterachsöl.

http://195.82.66.170/castrol/oilguide/index.php?id=1&chapter=158&range=1544&model=12022

Zusammengefasst meine Empfehlung:
Geh in den handel und hol dir hochwertiges Schaltgetriebe Öl für Getriebe und VTG, und hol dir gutes 75 W140 Achsöl!!

Grüße René